A two‐dimensional layered CdII coordination polymer with a three‐dimensional supramolecular architecture incorporating mixed multidentate N‐ and O‐donor ligands

The combination of N‐heterocyclic and multicarboxylate ligands is a good choice for the construction of metal–organic frameworks. In the title coordination polymer, poly[bis{μ₂‐1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole‐κ²N³:N⁴}(μ₄‐butanedioato‐κ⁴O¹:O^1′:O⁴:O^4′)(μ₂‐butanedioato‐κ²O¹:O⁴)dicadmium], [Cd(C₄H₄O₄)(C₉H₈N₆)]_n, each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from three carboxylate groups of three succinate (butanedioate) ligands and two N atoms from two 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligands. Cd^II ions are connected by two kinds of crystallographically independent succinate ligands to generate a two‐dimensional layered structure with bimt ligands located on each side of the layer. Adjacent layers are further connected by hydrogen bonding, leading to a three‐dimensional supramolecular architecture in the solid state. Thermogravimetric analysis of the title polymer shows that it is stable up to 529 K and then loses weight from 529 to 918 K, corresponding to the decomposition of the bimt ligands and succinate groups. The polymer exhibits a strong fluorescence emission in the solid state at room temperature.     

Two novel organic–inorganic hybrid materials from tetrachloridometallate(II) salts and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium

Two organic–inorganic hybrid compounds have been prepared by the combination of the 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium cation with perhalometallate anions to give 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridocobaltate(II), (C₁₂H₁₂N₂)[CoCl₄], (I), and 4‐[(E)‐2‐(pyridin‐1‐ium‐2‐yl)ethenyl]pyridinium tetrachloridozincate(II), (C₁₂H₁₂N₂)[ZnCl₄], (II). The compounds have been structurally characterized by single‐crystal X‐ray diffraction analysis, showing the formation of a three‐dimensional network through X—H...Cl_nM⁻ (X = C, N⁺; n = 1, 2; M = Co^II, Zn^II) hydrogen‐bonding interactions and π–π stacking interactions. The title compounds were also characterized by FT–IR spectroscopy and thermogravimetric analysis (TGA).     

Hybrid projection methods for equilibrium problems with non‐Lipschitz type bifunctions

Based on the extended extragradient‐like method and the linesearch technique, we propose three projection methods for finding a common solution of a finite family of equilibrium problems. The linesearch used in the proposed algorithms has allowed to reduce some conditions imposed on equilibrium bifunctions. The strongly convergent theorems are established without the Lipschitz‐type condition of bifunctions. The paper also helps in the design and analysis of practical algorithms and gives us a generalization of some previously known problems. Copyright © 2017 John Wiley & Sons, Ltd.     

Gold‐Catalyzed Suzuki Coupling of ortho‐Substituted Hindered Aryl Substrates

A method that allows hindered ortho ‐substituted aryl iodides to be efficiently coupled to phenylboronic acid using a gold‐catalyzed C−C bond formation is presented. The use of a molecularly‐defined dinuclear gold chloride catalytic precursor that is stabilized by a new tetradentate (N ,N′ )‐diamino‐(P,P′ )‐diphosphino ferrocene hybrid ligand in a Suzuki‐type reaction is described for the first time. Electron‐rich isopropyl groups on phosphorus were found essential for a superior activity, while the performances of a set of analogous gold dinuclear complexes that were fully characterized by multinuclear NMR spectroscopy and XRD analysis, were investigated. Therefore, arylation of para and ortho ‐substituted iodoarenes bearing electron‐rich, electron‐poor functional groups, and even hindered polycyclic aromatic compounds is described.     

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction combined with ultraviolet‐visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction method combined with ultraviolet‐visible spectrophotometry was developed for the determination of selected cationic dyes in textile wastewater. Polypyrrole‐magnetite was used as adsorbent due to its thermal stability, magnetic properties, and ability to adsorb Rhodamine 6G and crystal violet. Dispersive micro‐solid‐phase extraction parameters were optimized, including sample pH, adsorbent amount, extraction time, and desorption solvent. The optimum polypyrrole‐magnetite dispersive micro‐solid phase‐extraction conditions were sample pH 8, 60 mg polypyrrole‐magnetite adsorbent, 5 min of extraction time, and acetonitrile as the desorption solvent. Under the optimized conditions, the polypyrrole‐magnetite dispersive micro‐solid‐phase extraction with ultraviolet‐visible method showed good linearity in the range of 0.05–7 mg/L (R ² > 0.9980). The method also showed a good limit of detection for the dyes (0.05 mg/L) and good analyte recoveries (97.4–111.3%) with relative standard deviations < 10%. The method was successfully applied to the analysis of dyes in textile wastewater samples where the concentration found was 1.03 mg (RSD ±7.9%) and 1.13 mg/L (RSD ± 4.6%) for Rhodamine 6G and crystal violet, respectively. It can be concluded that this method can be adopted for the rapid extraction and determination of dyes at trace concentration levels.     

考虑损伤的修正梯度弹性理论

梯度弹性理论在描述材料微结构起主导作用的力学行为时具有显著优势,将其与损伤理论相结合,可在材料破坏研究中考虑微结构的影响.基于修正梯度弹性理论,将应变张量、应变梯度张量和损伤变量作为Helmholtz自由能函数的状态变量,并在自然状态附近对自由能函数作Taylor展开,进而由热力学基本定律,推导出修正梯度弹性损伤理论本构方程的一般形式.编制有限元程序,模拟土样损伤局部化带的发展演化过程.结果表明,修正梯度弹性损伤理论消除了网格依赖性;损伤局部化带不是与损伤同时发生,而是在损伤发展到一定程度后再逐渐显现出来.     

Mo掺杂NiMnSe2的制备及其超级电容器性能

成分和结构是影响多元过渡金属硒化物电化学活性的关键因素。适当掺杂其他金属元素可以有效提高电极材料的电化学性能。通过简单的一步水热法,在泡沫镍上制备出了一种无黏结剂的Mo掺杂NiMnSe₂(记作Ni_0.8Mo_0.2MnSe₂)。Mo的少量掺杂为电极材料提供了丰富的反应活性位点,大大提高了NiMnSe₂的电化学性能。在1 A·g^-1时,Ni_0.8Mo_0.2MnSe₂的比容量达到1 404.0 F·g^-1。掺杂Mo显著降低了NiMnSe₂的电荷转移电阻和扩散电阻。组装的混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC (活性炭)比容量达到81.6 F·g^-1,且倍率性能优异。在2 A·g^-1下连续充放电10 000周,容量保持率为95.8%,表现出超高的循环稳定性。混合超级电容器Ni_0.8Mo_0.2MnSe₂//AC在376.6 W·kg^-1的功率密度下,能量密度达25.5 Wh·kg^-1,高于NiMnSe₂//AC (17.3 Wh·kg^-1)。     

Flash Nanoprecipitation Fabrication of PEI@Amorphous Calcium Carbonate Hybrid Nanoparticles for siRNA Delivery

RNA interference (RNAi) is a promising approach for disease treatments. But the development of safe and effective delivery carriers remains a major challenge. Organic–inorganic hybrid nanoparticles (NPs), with the integration of functions from distinct materials, show great potential in small interfering RNA (siRNA) delivery. Herein, pH responsive amorphous calcium carbonate NPs (ACC NPs) are prepared using flash nanoprecipitation and hybrid NPs are constructed by coating ACC NPs with polyethyleneimine (PEI) for efficient siRNA delivery. PEI/ACC NPs show robust pH responsiveness and stability as well as effective siRNA loading and protection. Furthermore, siRNA-loaded PEI/ACC NPs demonstrate enhanced cellular uptake and efficient endosomal escape, mediating improved siRNA delivery compared to pure PEI. These findings suggest that PEI/ACC NPs may have great potential in siRNA delivery for RNAi-based therapy.     

Electrospun Aspirin/Eudragit/Lipid Hybrid Nanofibers for Colon-targeted Delivery Using an Energy-saving Process

Both electrospinning apparatus and their commercial pro-ducts are extending their applications in a wide variety of fields. However, very limited reports can be found about how to implement an energy-saving process and in turn to reduce the production cost. In this paper, a brand-new type of coaxial spinneret with a solid core and its electrospinning methods are developed. A novel sort of medicated Eudragit/lipid hybrid nanofibers are gene-rated for providing a colon-targeted sustained release of aspirin. A series of characterizations demonstrates that the as-prepared hybrid nanofibers have a fine linear morphology with the aspirin/lipid separated from the matrix Eudragit to form many tiny islands. In vitro dissolution tests exhibit that the hybrid nanofibers are able to effectively prevent the release of aspirin under an acid condition (8.7%±3.4% for the first two hours), whereas prolong the drug release time period under a neutral condition(99.7±4.2% at the se-venth hour). The energy-saving mechanism is discussed in detail. The prepared aspirin-loaded hybrid nanofibers can be further transferred into an oral dosage form for potential application in counte-ring COVID-19 in the future.